NEWS
Your location:
Home
/
/
2019

2019

  • Categories:History
  • Author:
  • Origin:
  • Time of issue:2021-09-06
  • Views:0

(Summary description)In October 2019, the 650 and 850 continuous milk units were successfully put into operation

2019

(Summary description)In October 2019, the 650 and 850 continuous milk units were successfully put into operation

  • Categories:History
  • Author:
  • Origin:
  • Time of issue:2021-09-06
  • Views:0
Information

In October 2019, the 650 and 850 continuous milk units were successfully put into operation

Scan the QR code to read on your phone

Previous: 2015
Next: 2021
Previous: 2015
Next: 2021

09-10

2021

What should be paid attention to in the maintenance of stainless steel elbow

There are many problems in the use and maintenance of stainless steel elbows, which require users to use them in a certain way, and use and maintain them in an accurate and fair manner. The considerations are as follows:   1. Stainless steel elbows stored for a long time should be checked in time, and the exposed surface should be kept clean, dirt removed, and stored neatly in a ventilated and dry place indoors. Stacking or open storage is strictly prohibited. Stainless steel elbows are always kept dry and breathable, and the holder is clean and tidy, and stored in accordance with accurate storage methods.   2. During installation, the stainless steel elbow can be directly installed on the pipeline according to the connection method, and the stainless steel elbow can be installed according to the location of use. Under normal circumstances, it can be installed in any position of the pipeline, but it requires easy-to-operate inspection. Note that the flow of the stainless steel elbow medium should flow under the longitudinal valve flap, and the stainless steel elbow can only be installed horizontally. When installing the stainless steel elbow, pay attention to sealing to prevent leakage and affect the normal operation of the pipeline. 3. When using stainless steel elbow ball valves, globe valves and gate valves, they can only be opened or closed, and the flow rate must not be adjusted to avoid wear of the sealing surface. The gate valve and the upper threaded globe valve are equipped with an inverted sealing device, and the handwheel is fastened to the top to prevent media Leakage from the filling point.    4. Use the hand wheel to make stainless steel elbows. Do not use levers or other tools to avoid damage to valve components. Turn the handwheel clockwise to close, and vice versa. When using, we should be fair and ensure the correct use of methods and means.   5. The bolts of the stainless steel elbow valve packing cover should be evenly tightened, and should not be pressed into a bent state, so as not to interfere with the movement of the valve stem or cause leakage.    6. The stainless steel elbow should be kept clean during use, and the transmission thread must be lubricated in time. Once a fault is found, it should be stopped immediately to find out the cause of the fault.

Service
Service hotline
086 316-7515381 086 316-7515381
Service time:
8:00 - 24:00
Service:
Online service
WhatsApp:

Hotline:

086 316-7515381

Address:Dongjiabao Village, Dongduan Township, Bazhou City, Hebei Province , China.
Tel:
086 316-7515381 7515382  7515887

WeChart

erweima

Message 

Username used for comment:
客户留言
Description:
验证码

Copyright © 2021 Hebei Shengbao Pipe Manufacturing Co., Ltd.   Powered by www.300.cn   冀ICP备2021017406号

Copyright © 2021 Hebei Shengbao Pipe Manufacturing Co., Ltd.

Powered by www.300.cn   冀ICP备2021017406号